Honeywell Series 2000 Manual page 15

Press increase or decrease
desired temperature offset is displayed (range
is 0° to 5°F).
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System
Press Run Program.
Run
Program
Set Program Set Temperature
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
key until the
Change
Time/Temp
Fan
AM
Change
Time/Temp
Mon
Occupied 1
System
Heat
Using Temporary Override
Press Temporary Occupied.
NOTE: The default temperature setting is the
M4981A
Temporary
Occupied
Room
Press increase
Fan
change the default setting by the offset (range
Auto
M4954A
is 0° to 5°F), if desired.
15
Occupied setpoint.
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
or decrease
Setting
Heat
Override
M4982B
key to
63-4356—1