Setting Current Day And Time - Honeywell Series 2000 Manual

The program has four temperature settings, Occupied
and Unoccupied heat and cool. The thermostat will
operate at the Unoccupied temperature setting
unless the thermostat is programmed. The following
chart shows the default temperature settings.
Occupied
Setpoint
Control Default
Heating 70°F
(21°C)
Cooling 78°F
(25.5°C)
63-4356—1
Unoccupied
Setpoint
Desired Default
55°F
(13°C)
90°F
(32°C)

Setting Current Day and Time

Press Set Current Day/Time.
NOTE: On initial power up or after an
Set Current
Desired
Day/Time
6
extended power loss, 1:00 pm flashes
on the LCD until a key is pressed.
Set Program Set Temperature Change
Time/Temp
Run Occupied Unoccupied Occupied Unoccupied
Program Start Time Start Time Day Temp Temp Mon
Temporary Set Current Clear Heat/Cool
Occupied Day/Time Start Time Copy Settings
Continous
Unoccupied System Fan
Set Day/Time
PM
M4951B