Honeywell 2000 Series Installation Instructions
Electronic temperature sensors
Hide thumbs
Also See for 2000 Series:
- User manual ,
- Installation, operation and maintenance manual (130 pages) ,
- Operating manual (72 pages)
Advertisement
Quick Links
C7031G; C7041B,C,F; T775-SENS-OAT
Series 2000 Electronic Temperature Sensors
C7031G, C7041F, T775-SENS-OAT OUTDOOR; C7041K STRAP-ON
C7041B,C DUCT; C7031D, C7041D IMMERSION
C7041B,C
SENSOR APPLICATIONS
Model
C7031D
C7031G
C7041B
C7041C
C7041D
C7041F
C7041K
T775-SENS-OAT
Be sure to take advantage of the entire line of quality Honeywell Sensors
C7041K
Strap-on
C7031D,
C7041D
Immersion
C7031G, C7041F,
T775-SENS-OAT
Table 1. Electronic Sensor Application Guide
Application
Immersion
Outdoor
Duct
Duct
Immersion
Outdoor
Strap-On
Outdoor
C7031G, C7041F,
T775-SENS-OAT
Outdoor
C7041B,C
Duct
C7031D,
C7041D
Output
1097 ohms @ 77 F
3484 ohms @ 77 F
20 K ohm NTC @ 77 F
20 K ohm NTC @ 77 F
20 K ohm NTC @ 77 F
20 K ohm NTC @ 77 F
20 K ohm NTC @ 77 F
1097 ohms @ 77 F
C7041R
Duct
Rigid
Copper
Averaging
INSTALLATION INSTRUCTIONS
C7041K
Element Insertion Length
5 in. (127 mm)
—
6 in. (152) or 12 in. (305 mm)
18 in. (457 mm)
5 in. (127 mm)
—
—
—
C7041P
Button
C7031J,
C7041J
Duct
Cable
Probe
62-0220—01
Advertisement
Related Manuals for Honeywell 2000 Series
Summary of Contents for Honeywell 2000 Series
- Page 1 C7041K Strap-On 20 K ohm NTC @ 77 F — T775-SENS-OAT Outdoor 1097 ohms @ 77 F — Be sure to take advantage of the entire line of quality Honeywell Sensors C7041K Strap-on C7041P C7031G, C7041F, Button T775-SENS-OAT Probe C7041R...
- Page 2 C7031G; C7041B,C,F; T775-SENS-OAT SERIES 2000 ELECTRONIC TEMPERATURE SENSORS INSTALLATION — immersion well applications — strap-on applications When Installing this Product... NOTE: Also refer to the instructions for the electronic control. 1. Read these instructions carefully. Failure to follow them could damage the product or Duct Mounting (C7041B,C) cause a hazardous condition.
- Page 3 Immersion Well Mounting (C7031D, C7041D) NOTE: The C7041D uses the 50001774-001 Well NOTE: Mounting using previously installed Assembly. See Fig. 5 for dimensions. Honeywell wells (part no.: 32005960-001) requires an adapter The C7031D Sensor includes an immersion well. The (part no.: 50001775-001).
- Page 4 Fig. 7. C7041K dimensions in in. (mm). Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9 customer.honeywell.com ® U.S. Registered Trademark © 2007 Honeywell International Inc. 62-0220—01 C.H. Rev. 06-07...