Cycle Settings, continued
Water Level (on select
Turn the water
level knob (on select models) to select a
water level appropriate
for the load size. For best results,
DO NOT overload. Add items loosely to the tub. The dry
load should not be higher than the top row of holes in the
wash tub. There should be enough
water in the tub for
items to move freely.
If auto water level is selected, the washer will perform
a dry load sensing procedure before adding water to
the tub. The sensing indicator light will be lit.
add a garment
Water level is automatically calculated by the washer on
models without a water
Soil Level (on select models)
Adjust duration of agitation time based on the soil level
of each load. Heavy, normal,
and light soil levels are
available on all models that have an adjustable soil level.
Some models also include extra light
and stain treat.
gives your cycle the agitation time of a
heavy selection plus the added benefit of a mid agitation
(on select models)
If your model is equipped with an automatic fabric
softener dispenser, you must turn the fabric softener
switch to the "on"
position for correct operation. See
Care and Cleaning for dispenser cleaning procedures.
saver (on select
saver option reduces water temperature to
save energy, lowers water usage slightly and also extracts
more water to reduce drying time.
spin (on select models)
Use this option to add minutes to the final spin. This will
improve water extraction, decrease drying time and save
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended
for heavily soiled loads or if household members have
chime (on select models)
A signal will sound at the end of the cycle if this option is