To select or delete the Energy Saver (if equipped),
Extra Rinse, Stain Clean, Extended Spin (if
equipped) or Signal Volume,
press Options until the
blinking light indicates the desired option. Then, while
it is blinking, press Select. The indicator will light when
the option has been selected. It will no longer be lighted
when the option has been removed.
Not all options are available on every model or are
compatible with every cycle. The indicator will not light if
the option is not available with that cycle,
To change the options once the cycle has begun, press
the pause button, make the new selection and press
@ No Spin
@ Extra Rinse
@ Extended Spin @ Normal
The options selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
To return to factory settings, press the Start/Pause
Select buttons at the same time and hold until the signal
Energy Saver (on select
The Energy Saver option reduces the warm water
a few degrees to save energy and also
extracts more water to reduce drying time.
Use this option when additional rinsing is desired to
remove excess dirt and detergent. It is recommended
for heavily soiled loads or if household members have
Use the stain clean option to add a 5-minute soak in
the middle of the wash portion of the cycle.
Spin (on select
Use this option to add minutes to the final spin at the
selected spin speed. This will improve water extraction,
decrease drying time and save energy.
A signal will sound at the end of the cycle if this option
is selected. The signal has an adjustable volume level
or can be turned off.
Auto @ Warm/CoLd
Temp @ Warm/Warm
@ _ Sanitize
Auto @ Hot/CoLd
Temp @ Warm/CoLd
O SignaL VoLume
Touch Pause to Add a Garment
Hlliiiiil s0 rt
@ Energy Saver
@ Extra Rinse
0 Signal VoLume @ Light
@ Touch Pause to Add a Garment