Follow the fabric care label instructions
on items to be washed.
Select appropriate wash water temperature, soil level (if
equipped), water level (if equipped) and options most
suitable for each load. Make selections according to fiber
content, colorfastness and soil level.
The settings can be changed before the cycle is started. If
changes are attempted after the cycle starts, the lights will
flash and a signal will beep, but the cycle will continue.
To change the settings once the cycle has begun, push
in the cycle selector knob to pause the cycle, make the
new selections and push in the selector knob again to
restart the washer.
Wash Water Temperature
Turn the temp knob until the desired wash water
temperature is selected. To protect your fabrics, the
temperature range from low to high settings may be
different depending on cycle selected. If an unavailable
temperature setting is selected by the user, the nearest
available temperature will be substituted. Refer to
complete washer settings chart.
The water heater setting and its distance from the
washer, water usage in other parts of the home, and
seasonally low ground water temperature
geographic areas can affect water temperature.
Use this setting for heavily soiled white or colorfast
cottons and blends.
Use this setting for normally soiled white or colorfast
cottons or blends.
cool (on select models)
Use this setting for normally soiled sheets, casual items
and washable woolens.
Some warm water will automatically blend with cold tap
supply to achieve cold, Use this setting for lightly soiled
non-colorfast items, knits, delicates, and hand washables,
Wash and rinse temperatures are equivalent to
of cold tap supply. Use this selection for
fabrics and colors that are prone to dye transfer. For
use with cold water _