Advertisement
www.intel.com
Validated and Tested by Intel, on Intel
All Intel® X25-E Extreme SATA Solid-State Drives are tested and validated on the latest Intel-based server and worksta-
tion platforms, for your peace of mind.
Intel® X25-E Extreme SATA Solid-State Drive
Technical Specifications
Model Name
Capacity
NAND Flash Components
Bandwidth
Read Latency
I/O Per Second (IOPS)
Interface
Form Factor
Compatibility
Life Expectancy
Power Consumption
Operating Shock
Voltage
Operating Temperature
RoHS Compliance
Product Health Monitoring
For more information, visit www.intel.com/go/ssd.
1. Active power is measured on an IOMeter workload of full bandwidth 64 K sequential writes with queue depth 1.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL
TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS,
INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING
LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLEC-
TUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life-saving, or lifesustaining applications. Intel may make changes to specifications and product descriptions at any
time, without notice.
Copyright © 2008 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.
*Other names and brands may be claimed as the property of others.
Printed in the United States. 0808/SD/HBD/PDF 319660-001US
Intel® X25-E Extreme SATA Solid-State Drive
32 GB and 64 GB
Intel® Single-Level Cell (SLC) NAND Flash Memory
10 Parallel Channel Architecture with 50nm SLC ONFI 1.0 NAND
Sustained sequential read: up to 250 MB/s
Sustained sequential write: up to 170 MB/s
75 microseconds
Random 4 KB reads: >35,000 IOPS
Random 4 KB writes: >3,300 IOPS
SATA 1.5 Gb/s and 3.0 Gb/s
2.5¨ industry standard hard drive form factor
SATA revision 2.6 compliant. Compatible with SATA 3 Gb/s with
Native Command Queuing and SATA 1.5 Gb/s interface rates
2 million hours Mean Time Before Failure (MTBF)
Active: 2.4 W typical (server workload
Idle (DIPM): 0.06 W typical
1,000 G/0.5 ms
5V SATA supply rail
0°C to +70°C
Meets the requirements of EU RoHS Compliance Directives
Self-Monitoring, Analysis and Reporting Technology (SMART)
commands, plus additional SSD monitoring
PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE,
®
)
1
Advertisement
