1.
install light bulb(s)
into socket(s).
Do Not use short neck bulb(s).
• Use bulb(s) rated for:
- rough service.
- vibration.
- appliances.
• 100 watt maximum.
2.
Bend two (2) slotted
tabs up. This will activate
the "living hinge" of the lens (Fig. 11-1).
3.
Start two (2) No. 8 x 3/4" hex head screws into
bottom holes of panel (Fig. 11-2).
• Slide slotted tabs up behind hex head screws.
• Tighten hex head screws.
4.
Align lens holes and holes of panel.
• Insert and tighten a No. 8 x 5/8" pan head
screw into each round lens hole and tighten,
Bend tabs up (2)_,__
Slotted
t_