Advertisement
Before starting
main limit switch settings,
LOCK
carriage onto rail assembly (See emergency
release tag).
1.
Raise the door until the carriage
engages with
the inner-slide/bullet.
2.
Set "OPEN" limit switch (Fig 6-1).
• Locate limit set switch on back of power head.
• Push and hold limit set switch until door moves
to the fully open position.
- release the limit set switch.
-"OPEN"
limit switch is set.
NO_!:"
!_dooy ' s_'.. # ::_s _:md fcdusc*s _o mov_ u_:?_d/:us_>
"OP
FORC.,/_Z _ pSee Sec_-o-n 7,_FORC;E
3.
Set "CLOSE" limit switch (Fig. 6-1).
• Push and hold limit set switch until door contacts
the ground and stops.
- release limit set switch.
-"CLOSE"
limit is set.
NOTE;
Ydoor s_ps
and f_@,_,ses _'omove d%>_,'_
adjust CLOSE
FORCE* _ee Section 7,FORCE
A©JUS
7_ia_d t2_ens_ea_' se_ing t7_[t sw _'ch
NOX{!; Do Not pus_ the l_m_ set s
h agai_ _<_ur
S,',_<_hs am seL S ;ght a<,:O_:us#_,ent may be need_;_dbi_<
_;ee Secth:;_n 8,,_NE L _VT SWTFC_W ADJUS
STEALTH
Advertisement
