Stanley 36SS Owner's Manual page 27

Hide thumbs Also See for 36SS:
Table of Contents

Advertisement

Troubleshooting
36SS, 45SS
Problem
Possible Causes
Solution
Snow blower will not move
1.
Transmission cable out of
1.
Readjusttransmission cable
forward or reverse
adjustment (too loose) or damaged.
If damaged, replace and readjust.
Cannot move snow blower
when the engine is off
1.
Transmission handle is pressed into
the engaged position
2.
Transmission cable out of
adjustment (too tight)
1.
Releasetransmission handle
2.
Readjusttransmission cable
Engine is overheating
1.
Dirt in the fuel line
2.
Dirty air filter
3.
Low engine oil
4.
Fouledspark plug
5.
Misuse of the snow blower
1.
Replacefuel filter and flush tank
2.
Cleanor replace the air filter
3.
Add engine oil
4.
Replace spark plug
5.
Walk the snow blower slowly
Rev: 11/2010
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

45ss

Table of Contents