Assembly Instructions; Adjusting Discharge Chute Deflector - Stanley 36SS Owner's Manual

Assembly Instructions 36SS, 45SS
Step 1: Control Panel Handles
1. Align the two holes on each side of the control panel handles
over the lower handle frame.
2. Insert the bolts through the handlebar holes and frame holes.
Secure in place with hardware provided.
Step 2: Directional Discharge Chute
• Attach the chute to the snow blower by using the six (6)
fasteners and lock nuts to securethe chute to the
snow blower.
Step 3: Chute Crank
Attach the cable coming from the middle of the control
panel by screwing the cable end onto the crank section.
Rev: 11!2010