Stanley 30SS Owner's Manual
  1. Manuals
  2. Brands
  3. Stanley Manuals
  4. Snow Blower
  5. 30SS
  6. Owner's manual
Stanley 30SS Owner's Manual

Stanley 30SS Owner's Manual

Hide thumbs Also See for 30SS:
Table of Contents

Advertisement

Quick Links

Download this manual
Snow Blower Owner's Manual
This manual contains important safety instructions for the gasoline engine powered
READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY.
When you call the help-line you will need to have the following information:
Date of Purchase:
Location of Purchase:
Serial # - Snow Blower:
*Serial number is located on the engine block below the starter.
snow blower models: 30SS, 36SS, 45SS
SAVE THIS MANUAL.
Need Help?
Parts, Service, and Technical Assistance call:
(919)-550-3259
Monday-Friday 8:00AM-5PM EST
gxipowerequipment.com
DO NOT RETURN THIS SNOW BLOWER TO THE
_______________________
_______________________
_______________________
STORE!
Snow blower and engine life are
extended greatly by performing
frequent lubrications, oil changes and
regular maintenance. To protect your
investment perform routine
maintenance.

Advertisement

Table of Contents
loading

Related Manuals for Stanley 30SS

Summary of Contents for Stanley 30SS

  • Page 1 Snow Blower Owner’s Manual This manual contains important safety instructions for the gasoline engine powered snow blower models: 30SS, 36SS, 45SS READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY. SAVE THIS MANUAL. Need Help? Parts, Service, and Technical Assistance call: (919)-550-3259 Monday-Friday 8:00AM-5PM EST gxipowerequipment.com...
  • Page 2 No part of this publication can be reproduced or distributed without prior written permission of GXi Outdoor Power, LLC Clayton, NC 27520 USA. STANLEY Is a registered trademark of The Stanley Works or its affiliates and is used under license by GXi Outdoor Power, LLC, 7868 Highway 70 Business, Clayton, NC 27520 GXi Outdoor Power, LLC reserves the right to discontinue or change specifications or design at any time without notice and without...
  • Page 3 STANLEY Product Lines 30SS, 36SS, 45SS For more information or where to purchase STANLEY outdoor power equipment, visit us at: www.GXiOutdoorPower.com Brush Mower  36” Brush Mower.  20 hp Kawasaki engine with electric start.  Dual hydrostatic drive for maneuverability.
  • Page 4 STANLEY Product Lines 30SS, 36SS, 45SS Electric Pressure Washer  1450 psi to 1800 psi electric pressure washers  20 ft of high pressure hose and 35 ft. cord with GFCI protection  Sleek and unique, high quality, stainless steel finish ...

  • Page 5: Table Of Contents

    Limited Warranty and Service ................31 About the STANLEY Snow Blower Manual Congratulations on the purchase of your new STANLEY commercial snow blower. We at GXi Outdoor Power are confident that this snow blower will provide excellent performance, outstanding quality, and great durability when operated and maintained as directed in this manual.

  • Page 6: Safety Information And Warnings

    WARNING Operator Responsibility It is the owner’s responsibility that all operators and WARNING! Do not use your STANLEY snow blower to mechanics must be trained and read this manual carry passengers. Keep bystanders, helpers, pets and before operating the snow blower as well as being children at a safe distance from the machine while it is in physically able individuals.

  • Page 7: Preparation Safety Precautions

    Preparation Safety Precautions 30SS, 36SS, 45SS Preparation—Safety Precautions 9. Be sure to inspect snow blower before each 1. Inspect the area where the equipment is to be use. used and remove all objects such as rocks, 10. Check the controls and shields to make sure...

  • Page 8: Operation Safety Precautions

    Operation Safety Precautions 30SS, 36SS, 45SS 14. Keep hands and feet away from augers/ Equipment Operation—Safety Precautions impeller . This product is capable of amputating 1. Do not operate the engine in a confined space hands and feet. where dangerous carbon monoxide fumes can 15.
  • Page 9 Operation Safety Precautions 30SS, 36SS, 45SS Do NOT over-prime the engine. Pressing the Clearing A Clogged Chute—Safety Precautions primer bulb more than 3x could result in flooding the carburetor making the engine hard to start 1. SHUT THE ENGINE OFF! or cause fuel to leak from the carburetor inlet.

  • Page 10: Safety Decals

    Safety Decals 30SS, 36SS, 45SS Safety Decal Identification The labels shown below are located on your snow blower to warn you of potential hazards and provide you with important safety information. If these decals become difficult to read or are missing from the snow blower, please contact GXi Parts &...

  • Page 11: Product Specifications

    Product Specifications 30SS, 36SS, 45SS Models Feature 30SS 36SS 45SS Product Type Snow blower Snow blower Snow blower Clearing Path 30” 36” 45” Engine 302cc 420cc 420cc Torque 15.9 ft.lbs 20.7 ft.lbs 20.7 ft.lbs Engine Start 120V Electric Start and recoil...

  • Page 12: Control Panel And Snow Blower Components

    30SS, 36SS, 45SS Control Panel and Snow Blower Components Throughout this manual, instructions are given on the operation of your STANELY snow blower. We recommend that while going through this manual, you have your snow blower available for quick and easy access in order to orient yourself with the controls, maintenance and orientation of different parts.

  • Page 13: Missing Parts Request Form

    Missing Parts Request Form 30SS, 36SS, 45SS Please indicate the part that you are missing: Name Hardware bag Other Address Date of purchase Model #: Phone Email Serial Comments: IMPORTANT: Please include your receipt. Without a receipt, your order will be delayed. You may also email us at: customerservice@gxioutdoorpower.com...

  • Page 14: Assembly Instructions

    Assembly Instructions 30SS, 36SS, 45SS Step 1: Control Panel Handles 1. Align the two holes on each side of the control panel handles over the lower handle frame. 2. Insert the bolts through the handlebar holes and frame holes. Secure in place with hardware provided. Insert bolts from the inside.
  • Page 15 Assembly Instructions 30SS, 36SS, 45SS Step 3: Chute Rotation Cable Connection (continued) 1. Locate the connection: The chute rotation cable connection is located at the base of the discharge chute between the engine and the discharge chute. 2. Slide the threaded end of the connector down the cable in order to easily see the end of the cable con- nection.
  • Page 16 30SS, 36SS, 45SS Step 4: Chute Direction Control Cable Support With the rubber lined one hole strap removed, put the chute direction control cable and the chute deflector cable into the opening, and press the strap together aligning the hole for the bolt.
  • Page 17 Assembly Instructions 30SS, 36SS, 45SS Step 7: Auger and Transmission Control Cables Control cables are preset at the factory, but may require additional adjustment for optimal operation. Control cables require periodic inspection and maintenance to maintain optimal performance. 1. Locate the black cable on the right side (standing from the operator position) of the snow blower. Ensure the cable is properly seated in the plastic guide pulley at the rear of the chassis.
  • Page 18 Assembly Instructions 30SS, 36SS, 45SS Step 9: Headlight 1. Connect snow blower headlight wire plug to the headlight bulb. 2. Connect the headlight bezel to the control panel. A. Tilt headlight assembly and align tabs on the top of the headlight bezel with the notches in the control panel.

  • Page 19: Starting The Engine

    Starting the Engine 30SS, 36SS, 45SS WARNING DANGER WARNING! The electric starter is designed to operate on 120 volt AC household current. Use only a UL-listed, 16 gauge extension cord for outdoor use that is Before attempting to use your snow blower, make sure you no longer than 50 feet (15 meters).

  • Page 20: Operating Instructions

    Operating Instructions 30SS, 36SS, 45SS Engage Transmission Drive Transmission Control Your snow blower is equipped with an easily To engage the transmission drive squeeze the right lever to adjustable transmission control, which can be the hand grip. adjusted for forward and reverse speed.
  • Page 21 Operating Instructions 30SS, 36SS, 45SS Chute Direction Control Headlights To rotate the chute to the right rotate the chute control To turn on the lights, flip the switch up. clockwise. To turn off the lights, flip the switch down. To rotate the chute to the left rotate the chute control counter-clockwise.
  • Page 22 Using your STANLEY Snow Blower The following tips will help ensure proper and long lasting use of your STANLEY snow blower. ALWAYS wear proper safe- ty equipment when operating the snow-blower, and make sure you dress appropriately for cold weather.

  • Page 23: General Maintenance

    CAUTION! Before making any adjustments and/or To help you properly care for your snow blower, the servicing to your STANLEY Snow Blower , make sure following pages include a recommended maintenance the snow blower is on a level surface, with the ignition...

  • Page 24: Maintenance Schedule

    Cleaning the Snow blower It is recommended that the STANLEY snow blower be cleaned on a daily basis. Excessive accumulation of dirt, debris, oil, etc. on the muffler, air filter, snow blower augers/impeller and engine may present a potential safety hazard.

  • Page 25: Service Adjustments

    Service Adjustments 30SS, 36SS, 45SS Adjusting Augers/Impeller Cable Adjusting Drive Cable If tension seems to be too loose or too tight, the If tension seems to be too loose or too tight, the drive augers/impeller, cables needs to be readjusted.

  • Page 26: Adjust/Replacing Drive And Augers/Impeller Belts

    Service Adjustments 30SS, 36SS, 45SS Check & Replacing the Transmission Drive Belt If belt needs to be changed or altered for any reason, the belt is located in the front of the snow blower behind the discharge chute and in front of the wheels.

  • Page 27: Adjusting Discharge Chute Deflector

    Service Adjustments 30SS, 36SS, 45SS Adjusting Discharge Deflector The discharge chute is preset at the factory, but may require adjustment over time or during maintenance. For adjustments, follow the procedure below: 1. Loosen the two nuts at the chute cable mount on the discharge chute.

  • Page 28: Storage Instructions

    Storage Instructions 30SS, 36SS, 45SS Short Term Storage   Let engine cool before storing and do not store Do not drain fuel indoors or near a flame. near flame, high heat, and possible ignitions from  sparks. Always park machine on level ground.

  • Page 29: Troubleshooting

    Troubleshooting 30SS, 36SS, 45SS Problem Possible Causes Solution Engine will not start 1. Key in the OFF position 1. Turn key to ON position 2. Insufficient fuel in the tank 2. Add gasoline 3. Air bubble in the fuel line 3.
  • Page 30 Troubleshooting 30SS, 36SS, 45SS Problem Possible Causes Solution Snow blower will not 1. Transmission cable out of 1. Readjust transmission cable move forward or reverse adjustment (too loose) or If damaged, replace and readjust. damaged. 2. Friction wheel rubber worn 2.

  • Page 31: Replacement Parts

    Auger shaft bearings, SB, SS, collector housing end, w ith plastic bushing, bearing housing  B06811 and hardw are Gear box support bar, SB, SS, black reinforcem ent, w ith top reinforcem ent plate, and  B06912 hardw are. B07011 Skid shoes, set of 2, steel, reversible, SS black, w ith hardw are 30" Scraper blade assem bly, 30SB, 30SS, black, w ith hardw are, scrapper blade assem bles to  B10912 bottom  of collector housing w ith carriage bolt heads dow n. B08211 Im peller shaft m ain bearing w ith support bracket and hardw are, SB, SS, black B09511 30" Snow  collectors (augers), set, 30SB, 30SS, black only replacem ents B08911 Auger/Im peller belt set of 2, SB, SS, aram id fiber M XV4‐370 B08112 Collector assem bly hardw are kit, SB, SS...
  • Page 32 30SS, 36SS, 45SS 3 6 S S C o lle c to r A s s e m b ly D ia g ra m K e y - Y e a r M o d e l 2 0 1 2 /1 3...
  • Page 33 30SS, 36SS, 45SS 4 5 S S C o lle c to r A s s e m b ly D ia g ra m K e y - Y e a r M o d e l 2 0 1 2 /1 3...
  • Page 34 Parts Diagram 30SS, 36SS, 45SS 30SS, 36SS, 45SS Chassis Assembly Reference 30, 36, 45 SS Collector Assem bly Diagram Key - Year M odel 2012/13 30, 36, 45 SS Collector Assem bly Diagram Key - Year M odel 2012/13 GXi Part...
  • Page 35 Fuel Tank with gas cap, fuel valve, fuel line, and clamps for 420cc Snow Blower Engine. B01712 Models: 36SB, 36SS, 45SB, 45SS Oil Fill Plug and Gasket for 420cc & 302cc Snow blower Engine. Models: 30SB, 30SS, 36SB, B09611 36SS, 45SB, 45SS...

  • Page 36: Limited Warranty And Service

    You must take the STANLEY product, accessory, replacement part, apparel or the power equipment on which the accessory or replacement part is installed, and proof of purchase, at your expense, to any STANLEY service location in the United States, who is authorized to service that product, during the service location’s normal business hours.

This manual is also suitable for:

36ss45ss

Table of Contents