How This Document Is Organized - Brocade Communications Systems ICX 6650 Configuration Manual

Brocade ICX 6650 slot and port numbering
•
•

How this document is organized

This document is organized to help you find the information that you want as quickly and easily as
possible.
The document contains the following components:
•
•
•
•
•
•
•
•
•
xii
Slot 2 is located on the back of the Brocade ICX 6650 device and contains ports 1 through 3
on the top row and port 4 on the bottom row. These ports are 2x40 GbE QSFP+. Refer to the
following figure.
Slot 3 is located on the back of the Brocade ICX 6650 device and contains ports 1 through 8.
These ports are 4 x 10 GbE breakout ports and require the use of a breakout cable. Refer to
the previous figure.
"IP Configuration" on page 1
"Base Layer 3 and Routing Protocols"
"RIP (IPv4)" on page 141
"RIP (IPv6)" on page 157
"OSPF version 2 (IPv4)" on page 167
"OSPF version 3 (IPv6)" on page 227
"BGP (IPv4)" on page 281
"IPv6" on page 401
"VRRP and VRRP-E" on page 411
Slot 2
Slot 2 Slot 3
on page 133