Displaying Dhcp Server Information - Brocade Communications Systems ICX 6650 Configuration Manual

Configuring IP parameters – Layer 3 Switches

Displaying DHCP Server information

The following DHCP show commands can be entered from any level of the CLI.
Displaying active lease entries
The show ip dhcp-server binding command displays a specific active lease, or all active leases, as
shown in the following example:
Brocade# show ip dhcp-server binding
The following output is displayed:
Brocade# show ip dhcp-server binding
Bindings from all pools:
Syntax: show ip dhcp-server binding [address]
•
Table 10
TABLE 10
Field
IP address
Client ID/Hardware address
Lease expiration
Type
Displaying address-pool information
This show ip dhcp-server address-pool command displays information about a specific address
pool, or for all address pools.
Brocade# show ip dhcp-server address-pools
Output similar to the following is displayed, as shown here.
Showing all address pool(s):
Pool Name:
Time elapsed since last save:
Total number of active leases:
Address Pool State:
IP Address Exclusions:
IP Address Exclusions:
Pool Configured Options:
bootfile: example.bin
78
IP Address Client-ID/
Hardware address
192.168.1.2 0000.005d.a440
192.168.1.3 0000.00e1.26c0
address - Displays entries for this address only
describes this output.
CLI display of show ip dhcp-server binding command
one
active
192.168.1.45
192.168.1.99 192.168.1.103
dhcp-default-router:
dns-server:
domain-name:
Lease expiration Type
0d:0h:29m:31s
0d:0h:29m:38s
Description
The IP addresses currently in the binding database
The hardware address for the client
The time when this lease will expire
The type of lease
0d:0h:6m:52s
2
192.168.1.1
192.168.1.100
example.com
Brocade ICX 6650 Layer 3 Routing Configuration Guide
Automatic
Automatic
53-1002603-01