Brocade Communications Systems ICX 6650 Configuration Manual page 149

TABLE 25
Field
total
errors
unreachable
time exceed
parameter
source quench
redirect
echo
echo reply
timestamp
timestamp reply
addr mask
addr mask reply
irdp advertisement The number of ICMP Router Discovery Protocol (IRDP) Advertisement messages sent or
irdp solicitation
UDP statistics
received
sent
no port
input errors
TCP statistics
The TCP statistics are derived from RFC 793, "Transmission Control Protocol".
current active tcbs
tcbs allocated
tcbs freed
tcbs protected
active opens
passive opens
failed attempts
active resets
passive resets
input errors
Brocade ICX 6650 Layer 3 Routing Configuration Guide
53-1002603-01
Displaying IP configuration information and statistics
CLI display of IP traffic statistics – Layer 2 Switch (Continued)
Description
The total number of ICMP messages sent or received by the device.
This information is used by Brocade customer support.
The number of Destination Unreachable messages sent or received by the device.
The number of Time Exceeded messages sent or received by the device.
The number of Parameter Problem messages sent or received by the device.
The number of Source Quench messages sent or received by the device.
The number of Redirect messages sent or received by the device.
The number of Echo messages sent or received by the device.
The number of Echo Reply messages sent or received by the device.
The number of Timestamp messages sent or received by the device.
The number of Timestamp Reply messages sent or received by the device.
The number of Address Mask Request messages sent or received by the device.
The number of Address Mask Replies messages sent or received by the device.
received by the device.
The number of IRDP Solicitation messages sent or received by the device.
The number of UDP packets received by the device.
The number of UDP packets sent by the device.
The number of UDP packets dropped because the packet did not contain a valid UDP port
number.
This information is used by Brocade customer support.
The number of TCP Control Blocks (TCBs) that are currently active.
The number of TCBs that have been allocated.
The number of TCBs that have been freed.
This information is used by Brocade customer support.
The number of TCP connections opened by this device by sending a TCP SYN to another
device.
The number of TCP connections opened by this device in response to connection requests
(TCP SYNs) received from other devices.
This information is used by Brocade customer support.
The number of TCP connections this device reset by sending a TCP RESET message to the
device at the other end of the connection.
The number of TCP connections this device reset because the device at the other end of the
connection sent a TCP RESET message.
This information is used by Brocade customer support.
131