Operating Instructions - Kenmore 587.14432 Use & Care Manual

Hide thumbs Also See for 587.14432:
Table of Contents

Advertisement

Available languages

Available languages

Operating
Instructions
Getting
Started
1. Load dishwasher
(See Preparing
and Loading
Dishes).
2. Add detergent
(See Dishwasher
Dispenser
&
Detergents).
3. Add rinse aid, if needed
(See Rinse Aid).
4. Select wash cycle (See Cycle Chart).
5. Select desired
energy
OPTIONS
(See Energy
Options).
6.
See page 12 for instructions
on connecting
the
portable
dishwasher.
7.
If using Wash Delay, go to step 9.
8.
Run hot water faucet
nearest
dishwasher
until
water is hot. Turn water off.
9.
To start, close door to latch. The ON indicator
light will glow throughout
the wash,
rinse and
dry portions
of cycle.
Wash
Delay
Allows you to delay starting
the POTS PANS or
NORMAL
WASH
cycle.
• Press POTS PANS or NORMAL
WASH
button and select desired
OPTIONS.
• Turn dial to number
of hours for wash delay.
• Close door to latch.
Plate
Warmer
For warming
dishes and serving
plates before
serving
hot foods.
• Load clean plates and dishes
to be warmed.
• Turn dial to PLATE
WARMER.
• Select heat dry option.
Cycles
Description
Time*
Washes/
(approx.)
Rinses
Pots
For pots, pans, casseroles
104 min.
2 washes
Pans
and dinnerware with dried-on
5 rinses
or baked-on soils.
Heavy
For heavily soiled dishes and
96 min.
2 washes
Wash
silverware.
4 rinses
Normal
For regularly soiled dishes
88 min.
2 washes
Wash
and silverware.
3 rinses
Water
For lightly soiled or pre-rinsed
80 min.
1 wash
Miser
dishes and silverware.
3 rinses
Rinse
For rinsing dishes that will be
8 min.
1 rinse
Hold
washed later.
* Includes dry time.
Cycle
Chart
To Select
Cycle
Water
(approx.)
• Press POTS PANS button.
11.1 gal.
• Select desired OPTIONS.
42.0
liters
• Turn dial to POTS PANS.
• Press POTS PANS button.
9.5 gal.
• Select desired OPTIONS.
36.0 liters
• Turn dial to HEAVY WASH.
• Press NORMAL WASH button.
8.0 gal.
• Select desired OPTIONS.
30.3 liters
• Turn dial to NORMAL WASH.
• Press NORMAL WASH button.
6.4 gal.
• Select desired OPTIONS.
24.2
liters
• Turn dial to WATER MISER.
• DO NOT USE detergent.
1.6 gal.
• Press NORMAL WASH button.
6.1 liters
• Select NO HEAT DRY option.
• Turn dial to RINSE HOLD.
Energy
Options
Water
Heat
Option
When WATER
HEAT option
is selected,
the
heating
element
in bottom of tub will raise the
main wash water temperature
to approximately
140°F. Wash action will continue
but timer will
not
advance
until this water temperature
has been
reached.
The hotter water provided
by this option
helps activate
dishwasher
detergent
to clean food
grease
and soil from dishes.
WATER
HEAT option
can be used with any cycle except
RINSE HOLD.
The WATER
HEAT light will glow until the water
temperature
reaches
140°F. To turn off option
press RESET
OPTIONS.
No Heat
Dry Option
NO HEAT DRY option saves electricity.
The
heating
element
stays off during drying portion
of
cycle. Additional
drying
time may be required,
with
door open, to completely
air dry dishes.
Some
water droplets
may remain
on door and in areas
where
dishes touch dishwasher
basket or rack.
To turn NO HEAT DRY option
off and select
a
heated drying
cycle, push the RESET
OPTIONS
button.
If NO HEAT DRY option is not selected,
a
heated drying
cycle is automatically
provided.
NO
HEAT DRY option
must be selected
with the
RINSE
HOLD cycle.
The drying
option may be changed
at any time
during the cycle and affects only the drying
period.

Advertisement

Table of Contents
loading

This manual is also suitable for:

587.14439587.14538587.17252587.17259587.17248

Table of Contents