Operating Instructions - Kenmore 587.1463 Series Use & Care Manual

Operating Instructions

Wash Cycles
Wash Cycle Selections
Cycle times are approximate and will vary
with the options selected. Hot water is
necessary to activate the detergent and melt
fatty food soils. An automatic sensor will
check the incoming water temperature. If
it is not at the appropriate temperature the
timer will delay the cycle to allow automatic
water heating during the main wash. When
the HIGH TEMP wash is selected an even
higher temperature will be assured to handle
heavier soil loads.
Wash Cycles
Heavy
Recommended for pots, pans, casseroles and
dinnerware having light to heavily soiled loads.
Normal Wash
Recommended for lightly to heavily soiled
loads.
Quick Wash
A shorter wash recommended for lightly
soiled loads that do not need drying.
China Crystal
Recommended for lightly soiled China and
Crystal.
Energy Saver
Recommended for lightly soiled and pre-
rinsed dishes and silverware.
Quick Rinse
Recommended for pre-rinsing dishes or
glasses. This is only a rinse that keeps food
from drying on your dishes and reduces
odor buildup in your dishwasher until you
are ready to wash a full load. Do not use
detergent.
Wash Options
Wash Options
Press the Options button to scroll through
the options. The indicator light will illuminate
when the option has been selected.
SANITIZE
When SANITIZE is selected, the temperature
of water will be maintained at 156.2°F (69°C)
max. The max temperature may not be
reached if the incoming water temperature is
not correct. Certified residential dishwashers are
not intended for licensed food establishments.
WARNING
The SANITIZE option is only available with
Heavy and Normal Wash cycles.
HIGH TEMP
When HIGH TEMP is selected, the
temperature of the water will be maintained
at 140°F (60°C) max.
HEAT DRY
When HEAT DRY is selected, the heater will
work during the drying process.
Functions
START
Press START to start a wash cycle. Press and
hold START for 3 seconds to cancel a cycle
that is already in progress.
Delay
The Delay option allows you to automatically
delay starting your dishwasher from 1-24
hours. To start 1-24 hour delay, press the
Delay button until the desired delay time
shows in the display window (1h-24h) and
press the START button. A light will come on
indicating the delay start has been activated
7
Functions Cycle
Indicator