Mark Shape - Furuno GP-1850WDF Operator's Manual

6. WAYPOINTS
2. Press the WAYPOINTS soft key to
display the WAYPOINTS menu.
ADD/EDIT/MOVE WAYPOINTS
LOCAL LIST
ALPHA/NUMERIC LIST
WAYPOINT BY CURSOR
WAYPOINT BY RANGE & BEARING
DGPS 3D
Waypoints menu
3. Press the WAYPOINT BY CURSOR soft
key. The plotter display appears.
4. Operate the cursor pad to place the
cursor on the location desired.
5. Press the NEW WPT soft key. The
waypoint window appears and it shows
mark shape, waypoint name, comment
(default: date), position of waypoint and
proximity alarm radius.
MARK NAME
0 0 1 WPT
COMMENT
17:38 02JUN02
LAT
34 12. 345' N
LON
135 12. 3457' W
PROXIMITY
0.00 nm
ALARM RADIUS
DGPS 3D
Waypoint window
6. If you do not need to change the
waypoint data, simply press the SAVE
soft key to register the waypoint and
return to the plotter display. If you want to
change waypoint data as shown in the
next several paragraphs, be sure to
press the SAVE soft key only after
changing all data you want to change.
6-2
Changing the shape and color of waypoint
mark
1. Press the SELECT MARK soft key.
WPT
2. Press the MARK SHAPE soft key to open
the mark shape selection window.
RETURN
3. Operate the cursor pad to select shape
desired.
NEW
WPT
4. Press the ENTER soft key or the
SELECT
[ENTER] key.
MARK
5. Press the SELECT MARK soft key.
COORD
TYPE
6. Press the MARK COLOR soft key to
N<-->S
open the mark color selection window.
E<-->W
SAVE
RETURN
7. Press ▲ or ▼ to select the color desired,
and then press the ENTER soft key or
the [ENTER] key.

MARK SHAPE

Mark shape selection window
SELECT COLOR
RED
YELLOW
GREEN
LIGHT BLUE
PURPLE
BLUE
WHITE
Mark color selection window