Furuno GP-1850WDF Operator's Manual page 102

MENU TREE
1
SOUNDER SETUP OPTIONS
SYSTEM SETUP Soft key
RANGE SETUP Soft key
CONFIGURATION
A-2
NOISE LIMITER ( OFF , NL1, NL2, NL3)
CLUTTER ( AUTO , 0-9)
WHITE MARKER [0-16 (or 0-8), Default: 0 ]
HUE (1-9, Default: 1 )
SIGNAL LEVEL [SL1, SL2, SL3, SL4, SL5, SL6 (or SL1, SL2, SL3), Default: OFF ]
PICTURE ADVANCE (2/1, 1/1 , 1/2, 1/4, 1/8, STOP)
E/S WINDOW ( STD , WIDE)
FISH ALM LVL (HIGH, NORMAL , LOW)
TX POWER ( ON , OFF)
TVG 200 kHz (0-9, Default: 5 )
TVG 50 kHz (0-9, Default: 5 )
ECHO OFFSET 200 kHz (-20 - +20, Default: 0 )
ECHO OFFSET 50 kHz (-20 - +20, Default: 0 )
SEABED LVL 200 kHz (20-200, Default: 80 )
SEABED LVL 50 kHz (20-200, Default: 80 )
RANGE1 (Default: 15 ft)
RANGE2 (Default: 30 ft)
RANGE3 (Default: 60 ft)
RANGE4 (Default: 120 ft)
RANGE5 (Default: 200 ft)
RANGE6 (Default: 400 ft)
RANGE7 (Default: 1000 ft)
RANGE8 (Default: 4000 ft)
ZOOM RANGE (7-4000 ft, Default: 30 ft )
B/L RANGE (10, 20 ft)
SETUP NMEA PORT 1
SETUP NMEA/DGPS PORT 2
SELECT SNTNC. soft key
UPLOAD/DOWNLOAD DATA
SELF TEST (MEMORY, I/O; KEYBOARD;
SYSTEM MENU
TEST PATTERN, REMOTE CONTROLLER TEST)
DEMONSTRATION MODE
MEMORY/TRIP CLEAR
: When 8 is selected in HUE window
Setting range: 7-4000 ft
FORMAT
(NMEA0183Ver.1.5, 2.0 )
LAT/LON FORMAT
(DD MM.MM', DD MM.MMM ', DD MM.MMMM)
FORMAT
(NMEA0183Ver.1.5, 2.0, RTCM104EX, RTCM104INTRN ,
RTCM104OUT)
LAT/LON FORMAT
(DD MM.MM', DD MM.MMM' , DD MM.MMMM)
(AAM, APB , BOD, BWC/BWR*, DBT**/DPT, GGA,
GLL , MTW, RMA, RMB , RMC , VTG , WPL, XTE,
ZDA )
*: BWR: For RHUMB LINE, BWC: For GREAT CIRCLE
**: When NMEA 0183 Ver. 1.5 is selected.
DOWNLOAD WAYPOINT/RTE TO PC
UPLOAD WAYPOINT/RTE FROM PC
SAVE DATA TO MEMORY CARD
LOAD DATA FROM MEMORY CARD
DEMO MODE
DEMO SPEED
DEMO COURSE
DEMO START LAT
DEMO START LON
CLEAR PLOTTER MEMORY ( NO , YES)
CLEAR GPS MEMORY ( NO , YES)
CLEAR ALL MEMORY ( NO , YES)
TRIP METER RESET ( NO , YES)