Demonstration Display - Furuno GP-1850WDF Operator's Manual

1. OPERATIONAL OVERVIEW
1.9

Demonstration Display

The demonstration display provides
simulated operation of this unit. On the
plotter display, own ship tracks, at the speed
selected, a figure eight course or any course
you enter, starting from position entered. All
controls are operative; you may set
destination, enter waypoints, etc. Simulated
sounder operation is also provided.
1. Press the [MENU] key, followed by the
CONFIGURATION and SYSTEM MENU
soft keys to open the system menu.
2. Press the DEMONSTRATION MODE soft
key to open the demonstration setting
screen.
OFF
DEMO MODE
DEMO SPEED 10.0kt
000.0
DEMO COURSE
DEMO START LAT
135 12.34'E
DEMO START LON
DGPS 3D
Demo setting screen
3. Press ▲ or ▼ to select DEMO MODE.
4. Press the EDIT soft key to show the
demo mode window.
DEMO MODE
ON
OFF
Demo mode window
5. Press ▲ to select ON.
6. Press the ENTER soft key or the
[ENTER] key.
7. Select DEMO SPEED and press the
EDIT soft key. Enter speed. Select digit
with ◄/► and enter appropriate numeric
value with the numeric keys.
8. Press the ENTER soft key or [ENTER]
key.
1-8
DEMO
MODE
EDIT
34 12.34'N
RETURN
9. Select DEMO COURSE and press the
EDIT soft key. Select how you want the
courseline to be traced; by FIGURE 8 or
DIR.(ection). For DIR., enter course.
10. Press the ENTER soft key or [ENTER]
key.
11. Select DEMO START LAT, and press the
EDIT soft key. Enter latitude. Use the N<
- > S soft key to switch coordinates if
necessary.
12. Press the ENTER soft key or [ENTER]
key.
13 Select DEMO START LON, and press
the EDIT soft key. Enter longitude. Use
the E< - > W soft key to switch
coordinates if necessary.
14. Press the ENTER soft key or [ENTER]
key.
15. Press the RETURN soft key.
16. Press the [PLOT] soft key.
To cancel the demonstration display, set
DEMO MODE to OFF.