Setting Date And Time - Panasonic AG-AC8PJ Operating Instructions Manual

Preparation

Setting date and time

The clock is not set at the time of purchase. Make sure to set the clock.
1
Select the menu. (
: [OTHER FUNCTION] # [CLOCK SET]
MENU
2
Select the date and time to be set using the
cursor button right or left, then adjust the
desired value using the cursor button up or
down.
≥ The year can be set between 2000 and 2039.
3
Select [ENTER] using the cursor button right or left, then press the
button in the center.
≥ The screen may switch to the setting screen for the [TIME ZONE]. Using cursor
button and set the [TIME ZONE].
≥ Select [EXIT], then press the button in the center or press the MENU button to
complete the setting.
≥ When the unit is turned on for the first time, a message asking you to set the date and time will
appear. Select [YES] and perform Steps 2 to 3 to set the date and time.
≥ The date and time function is driven by a built-in lithium battery.
≥ If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the
built-in lithium battery, connect the AC adaptor or attach the battery to this unit. Leave the unit as
it is for approx. 24 hours and the battery will maintain the date and time for approx. 6 months.
(The battery is still being recharged even if the unit is off.)
≥ The way that time is displayed can be changed in the menu settings.
[SW & DISP SETUP] # [DATE/TIME] or [DATE FORMAT]
Time zone
Time difference from the Greenwich Mean Time can be set.
1 Select the menu. (
: [OTHER FUNCTION] # [TIME ZONE]
MENU
≥ If the clock is not set, set the clock to current time first.
2 Select the region to record using the cursor button right or left.
3 Select [ENTER] and press the button in the center.
≥ Select [EXIT] and press the button in the center to complete the setting.
≥ When the time zone setting is changed, the date/time setting of the unit also changes
automatically.
23)
l
23)
l
- 22 -
Example: For USA
(l 98)