Relay Recording; Backup Recording - Panasonic AG-AC8PJ Operating Instructions Manual

[2 MEDIA FUNC.]
You can set the relay recording and backup recording.
≥ Insert SD cards to card slot 1 and card slot 2.
: [RECORD SETUP] # [2 MEDIA FUNC.] # desired setting
MENU
[OFF]:
[Relay(AutoSw)]:
[BACKUP]:

∫ Relay recording

It is possible to continuously record on the SD card in the other card slot even when the available
capacity of the SD card runs out during the recording. Note that there will be a momentary pause in
the sound when recording media is switched.
≥ is displayed on the media to record the motion picture.
media is switched and the relay recording is started.
≥ Relay recording can only be performed once.
≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the external drive.
≥ If [DELETE RELAY SCENE] or [RELAY INFO CANCEL] is performed after [RELAY SCENE
COMBINE] is performed, Relay Recording will be available again. If [RELAY SCENE COMBINE]
is not performed and [Relay(AutoSw)] in [2 MEDIA FUNC.] is selected, a message will be
displayed. You will be able to perform Relay Recording by selecting [YES] and press the button in
the center, but you will not be able to perform the [RELAY SCENE COMBINE] after that.
≥ If an SD card containing the first portion of a relay-recorded scene is inserted into a card slot
when [Relay(AutoSw)] is set, a message confirming whether to cancel the relay information is
displayed. Selecting [YES] will cancel the relay information from the scene, while selecting [NO]
will set [Relay(AutoSw)] to [OFF].

∫ Backup recording

Same motion picture can be recorded on two SD cards.
is displayed on the cards the motion pictures is recorded.
≥
≥ If [SD CARD 1] has been selected as a recording destination for motion pictures in [MEDIA
SELECT] (l 26), the backup will be recorded on [SD CARD 2].
≥ It is recommended to record on the SD cards that are same speed class and same capacity when
performing the backup recording.
(Relay recording)
≥ After Relay Recording, a recording destination for still pictures will also be switched to the other
media.
(Backup recording)
≥ Backup recording will not be performed for still pictures.
≥ When performing backup recording, even in the case where an error has occurred in one of the
media and recording has stopped, recording can be continued using the other media.
≥ When one of the media reaches its maximum recording time, the backup recording stops. If free
space on the other media is still available, the recording will continue.
Cancel the setting.
Set the relay recording.
Set the backup recording.
(l 80)
will disappear when the recording
- 60 -