Setting The Time Code - Panasonic AG-AC8PJ Operating Instructions Manual

Setting the Time Code

Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame [NDF])
TC 00:00:00.00 (hour : minute : second . frame [DF])
[PS 1080/60p], [PH 1080/60i], [HA 1080/60i], [HG 1080/60i],
[HE 1080/60i], [PM 720/60p], [SA 480/60i]
[TC MODE]
Select the compensation mode for the time code.
: [RECORD SETUP] # [TC MODE] # desired setting
MENU
[DF]:
[NDF]:
≥ It is automatically set to [NDF] when the Interval Recording is used.
[TCG]
Sets the way the time code will move.
: [RECORD SETUP] # [TCG] # desired setting
MENU
[FREE RUN]:
[REC RUN]:
≥ It is automatically set to [FREE RUN] when it is set to PRE-REC.
≥ The time code will reset when the built-in lithium battery is exhausted when it is set to
[FREE RUN].
Recording format
Time code is compensated in accordance with the actual time. It is
mainly used for broadcasting such as TV programs.
It will not compensate the time code. (There will be a difference from
the actual time)
It will constantly move.
It will move only when recording.
- 44 -
Frame
0 to 29