Viewfinder adjustment
≥ These settings will not affect the images actually recorded.
Adjusting the field of view
It adjusts the field of view to show the image on the viewfinder clearly.
1
Adjust the viewfinder to suit your
vision so that you can see the
display images clearly.
≥ Be careful not to trap your fingers when moving
the viewfinder.
≥ The viewfinder can be lifted vertically up to
approximately 90o.
≥ Close the LCD monitor and turn on the
viewfinder.
2
Adjust the focus by operating the
eyepiece corrector lever.
[EVF SET]
Brightness of the viewfinder can be switched.
Select the menu.
(l
: [SW & DISP SETUP] # [EVF SET] # desired setting
MENU
[BRIGHT]/[NORMAL]/[DARK]
Recording yourself
≥ Change the mode to
Rotate the LCD monitor towards the lens side.
≥ Displaying during the recording yourself can be
switched by setting [SELF SHOOT].
≥ Only some indications will appear on the screen when the [SELF SHOOT] is set to [MIRROR].
When
appears, return the direction of the LCD monitor to normal position and check the
warning/alarm indication.
23)
.
(l
(l
111)
99)
- 21 -
A Eyepiece corrector lever