Craftsman 486.24222 Owner's Manual page 8

STEP 13 - ATTACH BAG BOTTOM
• Insert the bag frame strap into the stitched sleeve at
the front edge of the bag bottom. See fi gure 11.
BAG FRAME STRAP
STITCHED
SLEEVE
FIGURE 11
• Assemble the bag frame strap to the holes in the
lower hopper tubes using two clevis pins (O) and hair
cotter pins (M). See fi gure 12.
BAG FRAME STRAP
CLEVIS PIN (O)
FIGURE 12
HAIR COTTER
PIN (M)
• Fold the bag fl aps around the lower hopper tubes and
attach to the bag bottom using the snaps. See fi gure
13.
SNAP
FIGURE 13
STEP 14 - ASSEMBLE HOPPER CLAMPS
• Assemble two hopper mount clamps (Q) over the hole
in the middle of each upper hopper tube using two
carriage bolts ( E) and two nylock nuts (F). Tighten
only fi nger tight. See fi gure 14.
5/16" x 3/4"
CARRIAGE
BOLT (E)
HOPPER
MOUNT
CLAMP (Q)
UPPER
HOPPER
TUBE
FIGURE 14
8
FLAP
5/16" NYLOCK
NUT (F)