3
Multimeter Features
Freezing the Display (Trig Hold-Log and Auto Hold-Log)
Freezing the Display (Trig Hold-Log and Auto Hold-Log)
N O T E
Trig Hold-Log operation
N O T E
Auto Hold-Log operation
72
Trig Hold-Log and Auto Hold-Log readings are recorded automatically for
future review or analysis by default. See
Readings (Recall)"
on page 74 to learn more.
To freeze the display for any function, press the
Figure 3-5 Trig Hold-Log display
Press
again to automatically update the display to
reflect data that was acquired during the hold.
The
annunciator will flash while attempting to acquire a stable
reading.
Press and hold
mode.
Pressing the
for more that 1 second activates the Auto
Hold- Log function.
"Recalling Previously Recorded
for more than 1 second to exit this
U1231A/U1232A/U1233A User's Guide
key.