Figure 2-21 Temperature Measurement Without Ambient - Agilent Technologies U1231A User Manual

2 Making Measurements
Measuring Temperature
56
Available options:
• °C - Temperature measured in °C only.
°C°F - During temperature measurements, press
•
switch between °C and °F.
°F - Temperature measured in °F only.
•
°F°C - During temperature measurements, press
•
switch between °F and °C.
4 Press
to save the changes. Press and hold
the multimeter restarts
Temperature measurement without ambient compensation
If you are working in a constantly varying environment,
where ambient temperatures are not constant, do the
following:
1 Press and hold
0 °C compensation (
of the relative temperature.
2 Avoid contact between the thermocouple probe and the
surface to be measured.
3 After a constant reading is obtained, press
reading as the relative reference temperature.
4 Touch the surface to be measured with the thermocouple
probe and read the display.
Figure 2-21 Temperature measurement without ambient compensation
for more than 1 second to select the
). This allows a quick measurement
U1231A/U1232A/U1233A User's Guide
to
to
until
to set the