Burglary Protection; Memory Of Alarm - Honeywell VISTA-128BPTSIA User Manual

Commercial burglary partitioned security system with scheduling
Hide thumbs Also See for VISTA-128BPTSIA:
Table of Contents

Advertisement

NOTE: Cross Zoning and Swinger Suppression options can help reduce false alarms.
Ask your installer if your system is programmed for either of these features. An Abort
Window feature exists for all non-fire zones. All non-fire alarm reports are NOT
transmitted to the central station if the code + off sequence is entered within the
Abort Window time period. Ask your installer if this feature has been programmed.
There is also a 5-minute Cancel Window feature in your system. Starting at the end
of the Abort Window you can cancel an alarm. A cancel signal is transmitted if either
the alarm system is disarmed or both a disarm and a function key is pressed during
the 5-minute Cancel Window time-period. A message of alarm aborted will appear on
the keypad screen if this condition occurs.

Burglary Protection

The burglary protection portion of your system must be turned on or "armed" before it
will sense burglary alarm conditions. Your system provides four modes of burglary
protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to
BYPASS selected zones of protection while leaving the rest of the system armed. The
system also provides a CHIME mode, for alerting users to the opening and closing of
doors and windows while the system is disarmed. Refer to the other sections of this
manual for procedures for using these features.
The following table lists the four different arming modes and the results of each.
Arming
Mode
AWAY
STAY*
INSTANT*
MAXIMUM
* The system provides three different STAY and INSTANT arming modes. See
ARMING IN THE STAY MODES and ARMING IN THE INSTANT MODES
sections for details on these modes.

Memory of Alarm

When an alarm condition occurs, the keypad displays the number(s) of the zone(s)
that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It
remains displayed until it is cleared by disarming the system (see DISARMING THE
SYSTEM section).
System Overview (cont'd)
Features For Each Arming Mode
Exit
Entry
Delay
Delay
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Perimeter
Armed
Yes
Yes
Yes
Yes
– 7 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vista-250bptVista-128bpt

Table of Contents