Honeywell LYNX Touch Security System User Manual page 59

The Reminder Feature can be used to program/record reminders that can be displayed on the
touch screen, announced by the control and/or sent to one or two pre-programmed phone
number(s). Check with your installer to see if the latter feature has been programmed on
your control.
Programming a Reminder
Ready To Arm
Arm Away Arm Stay
Delay 10:18 AM June 8, 2010
Ready To Arm
Program the system
Enter Code:
Cancel
Ready To Arm
Users
Events
Date Time Reminders
Tools
Dashboard
Settings
Back
5100-100-003-V0
1 2 3
4 6
5
7 9
8
Clear 0
5000-100-009-V0
Test Keypad
Slide Show WiFi Config
Back
5100-100-006-V0
– 59 –
USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
1. With the system in the disarmed state,
select the "Tools" icon from the second page
of the Home Screen. The system displays
the Keypad screen.
2. Enter your 4-digit Master User Code. The
system displays
programming screen.
3. Select the "Reminders" icon. The system
displays the Reminders screen.
Reminders
the Master User