Honeywell LYNX Touch Security System User Manual page 57

Editing/Deleting a Scene
Ready To Arm
Arm Away Arm Stay
Delay 10:18 AM June 8, 2010
Ready To Arm
Switches
68
Thermostat
Locks
Tools
Ready To Arm
Scene 1 Scene 2
Burglary Alarm CO Alarm
Scene 3 Scene 4
Fire Alarm Arm Stay
Add New
Edit
Scene
72
Zones
Automation
Phone
Message
More
5100-100-004-V0
Rules
Schedules
Scenes
5100-100-007-V0
Delete
5100-100-084-V0
– 57 –
USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
1. With the system in the disarmed state,
select the "Automation" icon from the Home
Screen. The system displays the Keypad
screen.
2. Select the "Scenes" button. The system
displays the Scenes screen.
3. Select the scene you wish to edit or delete.
4. Select the "Edit" or "Delete" button.
5. If "Edit" was selected, the system advances
to the Scene. Edit as required and proceed
to step 6. If delete was selected proceed to
step 7.
6. Select Save when complete. The system
returns to the Z-Wave device screen. Select
the " " button as required to return to the
Automation programming screen or the
Home or Dashboard screen.
7. The system displays a confirmation screen
and then returns to the previous screen.
Select the " " button as required to return
to the Automation programming screen or
the Home or Dashboard screen.
Automation