Honeywell LYNX Touch Security System User Manual page 13

ICON TEXT
Alarm 96
Medical
Alarm 99
Police
CO Alarm
Cover
Tamper
Reporter
Failure
Low
Battery
90 RF Jam
94 Phone
Line Cut
AC Loss
About the Display and Indicators
DEFINITION
The Medical icon displayed when a medical alarm is activated.
"Alarm" is also displayed in a red band along the top of the
screen.
(If programmed for display by your installer)
The alarm (bell) icon when a burglary alarm is activated.
"Alarm" is also displayed in a red band along the top of the
screen. (If programmed for display by your installer) No
display if 24 Hour Silent Response Type has been
programmed.
Displayed alternately with Carbon Monoxide when a CO alarm
is activated.
"CO Alarm" is also displayed in a red band along the top of the
screen.
A check system icon along with "Cover Tamper" is displayed
when a cover tamper has been detected. "Ready To Arm –
System Trouble" is displayed in a yellow band along the top of
the screen.
The system has identified a problem with the telephone dialer.
"Not Ready To Arm – System Trouble" is displayed in a yellow
band along the top of the screen. A low battery icon along with
"Low Battery" is displayed when the system's backup battery
power is low.
Appears when the system has detected an RF jamming
condition or excessive interference.
Appears when the system has detected a loss of telephone
service.
Displayed when the system has lost AC power. "Ready To
Arm – System Trouble" is displayed in a yellow band along the
top of the screen.
– 13 –
SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW