Honeywell LYNX Touch Security System User Manual page 51

Ready To Arm
Zone Number Operation
Fault
First Start Zone
Disabled Disabled
Second Start Zone Second Stop Zone
Disabled Disabled
Third Start Zone Third Stop Zone
Disabled Disabled
OR
Ready To Arm
Zone Number Operation
Fault
First Zone Fault
Disabled Disabled
Second Zone Fault Second Zone Restore
Disabled Disabled
Third Zone Fault Third Zone Restore
Disabled Disabled
Editing or Deleting Rules
Ready To Arm
Device 1 Device 2
System Armed
New
Follow Me
Device 3 Device 4
New New
Device 5 Device 6
New New
Edit
Ready To Arm
Name
System Armed
Type
Message to phone 1
Start Zone Type Stop Zone Type
Not Used
Start System Operation Stop System Operation
Armed Stay
First Stop Zone
Save
5000-100-192-V0
First Zone Restore
Save
5100-100-069-V0
Delete
5000-100-194-V0
01
Action
Send
Not Used
Save
Disarm
5000-100-195-V0
13. Select the First, Second or Third "Start Zone" or
"Zone Fault" (The name of this field is
dependant upon the "Type" that was selected in
Step 6.) Select the Zone from the list displayed
by the system.
14. Select the First, Second or Third "Stop Zone" or
"Restore Zone" (The name of this field is
dependant upon the "Type" that was selected in
Step 6.) Select the Zone from the list displayed
by the system.
15. Select "Save" when programming is complete.
16. Select the " " button. The system returns to
the Automation programming screen.
1. At the Rules Programming Screen, select the
Rule that you wish to edit or delete.
Note: Rules 21-40
TotalConnect Service.
2. To delete the rule, select the Delete button. To
edit the rule select the Edit button and proceed
to step 3.
3. Select the field that you wish to edit and follow
the steps as outlined in the Programming Rules
procedure.
– 51 –
USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
Automation
are only accessible through