Honeywell LYNX Touch Security System User Manual page 56

USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
Automation
Ready To Arm
Switches
68
Thermostat
Locks
4. Select the "Add New Device" button. The
system displays the available Z-Wave
device types. Select one of the following
options:
Switches
Thermostats
Locks
5. Select the desired device type, then select
the applicable device from the list of
installed devices. The device's operational
screen is displayed. Up to 10 devices may
5100-100-083-V0
be associated with a scene.
6. Set the desired options. Typical operations
are shown below:
Switches/Outlets
Set Switch/Outlet On
Set Switch/Outlet Off
Dim Switch
Thermostats
Set Temperature Mode (Heat, Cool, Off)
Set Fan Mode (Auto, On, Circulate)
Select Hold Mode (Temperature hold)
Setback
Note: If Schedules/Scenes feature will be used to
control the thermostat set points, do not use
the daily schedules in the thermostat itself.
Locks
Lock
Unlock
Note: For compatibility, do not include a door lock as
part of a scene that has auto-lock enabled.
Auto-lock may be disabled. For details, please
refer to the documentation provided with the
lock.
7. Select Save when complete. The system
returns to the Z-Wave device screen. Select
the " " button as required to return to the
Automation programming screen or the
Home or Dashboard screen.
– 56 –