Honeywell LYNX Touch Security System User Manual page 42

USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
Message Recording and Playback
Ready To Arm
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Play
NOTE: If you are trying to record a new message and the message center is already full, "Add New" will not
be displayed. If the message center is full all old messages must be deleted before new messages
can be recorded. See the Deleting Messages section.
Playing Message(s)
Ready To Arm
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Play
Deleting Messages
Ready To Arm
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Play
6. When you have finished recording, select
7. To record additional messages (if recording
Delete All
5000-100-046-V0
1.
2.
3.
Delete All
4.
5000-100-046-V0
1.
2.
Delete All
5000-100-046-V0
– 42 –
" ". The system displays the recorded
messages.
time is available) repeat steps 1 through 3.
At the Message
message you wish to play.
Select "Play", the system plays your
message.
When you are finished listening to the
message, you may select. "Stop". If "Stop"
is not selected the system continues to
play the remaining messages.
When you have finished listening to the
messages, select " ". The system returns
to the Home Screen.
At the Message screen, select "Delete All".
The system deletes all messages.
When you have finished deleting the
messages, select " ". The system returns
to the Home Screen.
screen, select the