Toshiba TRST-A10 SERIES Owner's Manual page 11

3. APPEARANCE
Error Status Table
Blue LED Blinking (Slow)
Problem
Receipt paper is low
Blue LED Blinking (Fast)
Problem
Receipt paper is out
Receipt cover is open
Knife failure
NOTE: If other LED status except for the above occurs, turn the power off, and then on. If this
does not restore the LED, contact your nearest TOSHIBA TEC representative for
assistance .
What to Do
There are about 4 ½ meters, ± 3 meters,
(15 feet, ± 10 feet) of paper left. Change
the paper soon to avoid running out of
paper part way through a transaction.
What to Do
Change the paper now. Do not run a
transaction without paper as the data
may be lost.
Close the cover. The printer will not
operate with the cover open.
Open the receipt cover and check the
knife. Clear any jammed paper you can
see. Tear off any excess paper against
the tear-off blade.
3-2
EO1-13019
3. 2 LED and Feed Button
Where to Go
See "Loading the
Receipt Roll" in
chapter 5.3.
Where to Go
See "Loading the
Receipt Roll" in
chapter 5.3.