3. MAINTENANCE
3.1.2 Platen/Sensors
3.1.3 Cover
CAUTION!
Do not use any volatile
solvents including thinner and
benzene, as this may cause
discoloration or distortion of
the cover.
1. Wipe the Platen with a soft cloth moistened with absolute alcohol.
2. Remove dust or paper particles from the Black Mark Sensor, Feed Gap
Sensor, and Ribbon Sensor using an air blower.
Black Mark Sensor
Platen
Ribbon Sensor
Wipe the Cover with a dry soft cloth. Wipe off dirt with a soft cloth
slightly moistened with water.
E3- 2
ENGLISH VERSION EO1-33062
3.1 Cleaning
Feed Gap Sensor