Toshiba B-SV4T SERIES Owner's Manual page 25

2. PRINTER SETUP
2.8 Loading the Ribbon
(Cont.)
NOTES:
1. Take up any slack in the
ribbon.
2 Do not load a ribbon when
using a direct thermal
5. Pull the leader tape of the ribbon downward, and feed it under the
Print Head.
6. Attach the leader tape to the Paper Core with adhesive tape.
Paper Core
media.
7. Rotate the Paper Core to take up the ribbon leader tape until it is
thoroughly covered by the black section of the ribbon.
8. Close the Ribbon Access Cover and Top Cover.
Print Head
E2-14
ENGLISH VERSION EO1-33062
2.8 Loading the Ribbon
Ribbon Roll