Kenmore 141.153371 Owner's Manual page 20

[] Installing Cooking Components
Important: Before cooking on your grill the first
time, wash the Cooking Grids and Cooking Rack
with warm, soapy water. Rinse and dry thoroughly.
Season with cooking oil regularly. After cooking is
completed, tum grill to HIGH setting three to five
minutes to burn off excess grease or food residue.
1. Place the three Steel Flame Tamers on the
lower ledge above Bumers. See Fig. 11.
2. Evenly space the Cooking Grids on the ledge
above the Flame Tamers.
3. Place the Secondary Cooking Rack into the
slots on the upper left and upper right of
Bowl Side Panels. See Fig. 11.
4. Install the Smoker Drawer into the opening on
the upper left side of Control Panel. Slide the
Smoker Drawer on the Smoker Drawer Bracket
inside grill.
Figure 11
SECONDARY COOKING RACK
COOKING GRID
STEELFLAME TAMER
SLOTS FOR RACK
\
SMOKER DRAWER
_BACK BURNER
2O