Renault Scenic Handbook page 22

fRONT sEATs WITh mANUAL cONTROL
2
1
To move the seat forwards or
back
Lift handle 1 to release. Release the
handle at the desired position and
make sure that it is locked.
To raise or lower the seat
base
Move lever 2 as many times as neces-
sary upwards or downwards.
1.16
(1/2)
4
3
To tilt the seatback
Turn control knob 3 to the required po-
sition.
To adjust the lumbar support
on the driver's seat
Lower handle 4 to increase the support
and lift it to decrease it.
For safety reasons, make
these adjustments only
when the vehicle is station-
ary.
We would advise you not to recline
the seatbacks too far to ensure that
the effectiveness of the seat belts is
not reduced.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.