Renault Scenic Handbook page 130

CRUISe CoNtRoL/SPeeD LIMIteR: cruise control function
1 2
3
adjusting the cruising speed
The cruising speed may be changed by
pressing the following repeatedly:
– switch 1 (+) to increase the speed,
– switch 2 (-) to decrease the speed.
The cruise control function
is in no way linked to the
braking system.
2.34
exceeding the cruising speed
The cruising speed may be exceeded
at any time by depressing the accelera-
tor pedal.
The cruising speed flashes on the in-
4
strument panel and, depending on the
vehicle, the display area lights up in
red to inform you that the limit speed is
being exceeded.
Then, release the accelerator: after a
few seconds, the vehicle will automati-
cally return to its set cruising speed.
5
Cruising speed cannot be
maintained
If driving up or down a steep gradient,
the system is unable to maintain the
cruising speed: this speed flashes on
the instrument panel and, depending
on the vehicle, the display area will light
up in red.
(3/4)
Putting the function on
standby
The function is suspended when you:
– press switch 3 (O);
– depress the brake pedal;
– depress the clutch pedal or shift into
neutral if the vehicle has an auto-
matic gearbox.
In these three cases, the cruising
speed remains stored and the mes-
sage "Memorised" accompanied by this
speed appears on the instrument panel.
Switching to standby is confirmed, de-
pending on the vehicle:

indicator light going out;
– by the
– or by the message area no longer
being lit up in green.