Renault Scenic Handbook page 131

CRUISe CoNtRoL/SPeeD LIMIteR: cruise control function
1 2
3
Returning to the cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road condi-
tions are suitable (traffic, road surface,
weather conditions, etc.).
Press switch 4 (R) if the vehicle speed
is above 20 mph (30 km/h).
When recalling the stored speed, the
activation of the cruise control is con-
firmed, depending on the vehicle:

– by the warning light coming on;
– or by the message area lighting up in
green.
4
5
Note: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
When the cruise control function is
put on standby, pressing switch 1 (+)
reactivates the cruise control func-
tion without taking into account the
stored speed: it is the speed at
which the vehicle is moving that is
taken into account.
(4/4)
Switching off the function
The cruise control function is deacti-
vated if you press switch 5: in this case
a speed is no longer stored. The green
a 
panel A goes out to confirm that the
function is deactivated.
must brake by depressing the brake
pedal.
indicator light on the instrument
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you
2.35