Renault Scenic Handbook page 206

tOOLS /WHEEL trIM
(2/2)
7
8
7-seater version
The tools are in compartment 8 of the
luggage compartment: lift the third row
rear right-hand seat, pull tab 7 then
take out the jack and the bag contain-
ing the tools.
To refit, reposition the bag containing
the tools in its housing, fold the jack
fully, wrap it in its soundproofing mate-
rial and place it in its housing. Check
that the assembly is correctly posi-
tioned (to avoid noise).
5.8
10
9
5-seater version
Lift luggage compartment carpet 9, and
secure it with the hook.
The tools are in kit 10.
D
B c
A
12
Wheel trim
Remove it using hubcap tool 4 by en-
gaging the hook in the recess provided
next to valve 12 (to attach the metal
clip).
To refit the hubcap, align it with
valve 12. Push the retaining hooks in
fully, starting with side A near the valve,
followed by B and C, finishing at D op-
posite the valve.
note: if you are using anti-theft bolts,
refer to the information on "Changing a
wheel".