Handle Assembly; Cord Assembly - Kenmore 116.36922 Owner's Manual

= == =HH=HH ,,,,,,,,,,,,,,,,,,,,,,,,,,
Please pay special attention to these hazard alert boxes, and follow any instructions
_b given_ WARNING statements alert you to such dangers as fire, electric shock, burns and personal injury. CAUTION statements alert you to such dangers as personal
injury andfor property damage.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover of
the separate REPAIR PARTS LIST. Use
this list to verify that you have received atl
the components of your new Kenmore
vacuum cleaner.
HANDLE ASSEMBLY
Remove the combination brush from
the handle to expose the handle mount-
ing holeo
Remove the handle screw from the body
of the vacuum cleaner..
Position the handle assembly as shown in
the illustration below
When installingthe handle, firmly press
the handle onto the body. Secure with
handle screw provided
Begin to tighten the screw with your fin-
gers.r It may be necessary to adjust the
handle slightly
Using a screwdriver, tighten handle screw.
Reinstall combination brush,
Assembly
Hand/e
Screw
Electrical
Connection
CORD ASSEMBLY
Make sure the quick release upper cord
hook is in the upright position Remove the
wire tie from the power cord
Make sure the
power cord is
placed into the lock-
ing notch on the
body as shown This
helps keep the
power cord out from
under the vacuum
cleaner agitator
Power !_ I
c°r' 1
_._F Cord
_<" Plug
Wrap the power cord around the quick
release cord hook and the carrying handle.
Lock the powercord plug onto the power
cord.