Motor Protection System; Agitator Motor; Troubleshooting - Kenmore 116.36922 Owner's Manual

Hide thumbs Also See for Kenmore 116.36922:
Table of Contents

Advertisement

MOTOR PROTECTION SYSTEM
Motor Protector
This vacuum
cleaner
has a motor protector
by-pass
valve which automatically
opens
to
provide
cooling
air to the vacuum
cleaner
motor when a clog prevents
the normal
flow of air to the motor, tf the by-pass
valve
opens
to prevent
motor overheating
and
possible
damage
to the vacuum
cleaner,
you will notice a change
of sound
as air
rushes through
the valve opening.
To correct
problem:
See the TROUBLE-
SHOOTING
section.,
NOTE: The motor
protector
may open
when using
attachments
or
when cleaning
new
carpet,
due to
reduced
airflow
caused
by the
attachments
themselves
or by
Motor Protector
new carpet lint filling
(Behind Hose)
the dust bin quickly,, See the
TROUBLESHOOTING
section_
Note:
Do not block motor protector°
Thermal
Protector
This vacuum
cleaner
has a thermal
protector,
which automatically
trips to
protect
both the vacuum
cleaner
and the
agitator
motor from overheating,
if a clog
prevents
the normal flow of air to the motor,
the thermal
protector
turns the motor off
automatically,
This allows the motor to cool
in order to prevent possible
damage
to the
vacuum
cleaner,
To correct
problem:
Turn the vacuum
cleaner off and unplug the power cord from
the outlet to allow the vacuum
cleaner
to
cool and the thermal
protector
to reset.
Check
for and remove
clogs, if
necessary,
See CLOG
REMOVAL
section,
Also
check
and replace
any
clogged
filters, Wait approximately
thirty
(30) minutes
and plug the vacuum
cleaner
in and turn
back on to see if
the motor
protector
has reset.
AGITATOR MOTOR
OVERLOAD
PROTECTOR
The agitator
motor has built-in
protection
against
motor damage
should the agitator
jam,, If the agitator
slows down or stops, the
agitator
overload
protector
shuts off the
agitator
motor,, The vacuum
cleaner
motor
will continue
to run,,
To correct
problem:
Turn off and unplug
vacuum
cleaner,
remove
obstruction,
then
press reset button°
To reset: Push in
the agitator
overload
protector
button,
If the problem
Agitator
Motor
OveHoad
Reset
Button
persists,
have the vacuum
cleaner
serviced
by a Sears
or other qualified
technician.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

116.36923

Table of Contents