Cord Assembly; Handle Assembly - Kenmore 216.37000 Owner's Manual

Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such dangers as
fire, electric shock, burns and personal injury. CAUTION statements alert
you to such dangerous personal injury and/or property damage.
Electrical Shock Hazard
Do not plug into the electrical
supply until the assembly is
complete. Failure to do so could
result in electrical shock or
injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover
of the separate REPAIR PARTS LIST or
on the carton° Use this list to verify that
you have received all the components of
your new Kenmore vacuum cleaner,
HANDLE ASSEMBLY
1, Attach upper handle
to main body of cleaner.
2, Push handle plug
onto the front of cleaner.
Insert the one (1) screw
into the back of the
handle and tighten,
making sure the handle
ugis secure.
CAUTION
Do not overtighten,
Overtightening could strip the
screw holes.
Do not operate the vacuum
cleaner without the screws in
place.
lit
CORD ASSEMBLY
Make sure the quick release upper
cord hook (A) is in the upright position.
Remove the wire tie from the power cord,
Wrap the power cord around the quick
release upper cord hook (A) and the lower
cord hook (B). Lock the power cord plug
(C) onto the power cord.
A
B
C
| |