Kenmore 116.36922 Owner's Manual page 16

,1111 ii i, iiiiiiii iii
WARNING
Always unplug power cord from elec-
trical outlet before performing any ser-
vice on vacuum cleaner.
......................... i
TO REMOVE DUST BIN
Lift dust bin handle located at the top of
the dust bin
Dust _
Bin
Pull the handle up
and lift dust bin up
and out of the vac-
uum cleaner,.
Remove any clogs that might be located in
the suction port or filter port area.
Suet_
TO EMPTY DUST BIN
Before removing debris from dust bin it is a
good idea to move the dust bin filter clean-
ing lever back and forth several times.
Moving the lever
back and forth
loosens the dust
and debris that
has attached
itself to the filter
element inside
the dust bin,
Dust BM--_.
Filter "_
Cleaning
Lever
Rotate dust bin handle to the vertical posi-
tion.
Hold dust bin
over a trash
container.
Press the dust
bin door
release button
downward to
release the
door.
The door will
swing open
and the debris
will fall into the
trash container.
Dust Bin
Handle -_
Dust Bin -1
Door
Release
Button
Shake the dust
Dust Bin
Emptying
Door
bin to release and debris that might hang
in the filter element.
Note: See PRIMARY FILTER REMOVAL
AND CLEANING section..
Door Door
Latch
After the dust bin is
empty of debris,
firmly close the
door., Make sure
you hear a "click"
sound to indicate
that the door is fully
latched°
TO REPLACE
DUST BIN
Place dust bin back
into vacuum cleaner
by inserting the bot-
tom first and tilting
back with the dust bin
handle raised.
Handle
Lower the dust
bin handle to
lock dust bin in
)lace.
noticeable
"click" should
be heard.
16