Kenmore 116.36922 Owner's Manual page 18

TO REPLACE DUST BIN LID
Replace dust bin lid assembly by placing
back on dust bin with marks on the lid
aligned as shown under Open (For
Emptying) on the back of the dust bin.
Turn This Direction
To Close For Use Open
(For Emptying)
Closed
(For Use)
Rotate clockwise while pressing downward
so marks align as shown above Closed
(For Use).
Insert dust bin
into vacuum
cleaner_
Lower the dust
Handle
bin handle to
lock dust bin in
place.
A noticeable
"click" should be heard,
The HEPA exhaust filter must be replaced
when dirty_ It should be replaced regularly
depending on use conditions.
The filter CANNOT be washed as it will
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number,.
Remove exhaust filter cover by pressing
the release tab on the cover and rotating
out from vacuum cleaner.
Exhaust
Filter
Cover
Remove
the filter
cartridge
from cover.,
Place new filter cartridge into cover making
sure that airflow arrow on side of cartridge
points into cover,,
The foam seal of the filter should be
placed against the vacuum cleaner
body.
Seal Against Exhaust
Vacuum Cleaner Filter
Body
Filter
Replace the exhaust filter cover by placing
bottom tabs in slots and rotating in until
cover snaps into place,,
18