Kenmore 116.36922 Owner's Manual page 9

Toselect a pile height setting:
Turn off vacuum cleaner, Select a pile height
setting by tilting the vacuum cleaner back
until front wheels are lifted slightly off the
floor,,
Slide the adjustment lever to the correct
setting_
There are four (4) pile height settings on the
vacuum cleaner_ Use the LOW setting for
most low-pile carpets and bare floor
cleaning (with agitator OFF), and the HIGH
setting for high-pile carpets like shag carpet,
scatter rugs, etco Use the other settings as
needed for carpet heights in between,
CAUTION
Do not allow vacuum cleaner to
remain in one spot for any length of
time when the agitator is turning.
Damage to carpet may occur°
............ i