IBM NetVista 6644 User Manual page 73

Symptom
When you try to use
the modem, it does not
work.
1. If you added, changed, or reinstalled a modem,
make sure it is installed correctly.
2. Make sure your communications program is
configured correctly. The following settings are
generally compatible:
• Modem settings:
– Generic Hayes-type modem
– Hayes-compatible error correcting
– Hayes-compatible high speed
– User-defined modem
– Hayes modem
– Other
If you select a modem type of Other, you must
include the proper modem initialization string.
For most programs, the initialization string
AT&F
will work.
• Baud rate: 115200 Kbps or the maximum setting
offered by your communications software
• COM port: COM1
For help with configuring your communications
program, refer to the documentation that comes
with your communications program.
If these actions do not correct the problem, run the
diagnostic programs (see "Running the IBM
Enhanced Diagnostics program" on page 62). If
you need technical assistance, see "Chapter 7. IBM
HelpWare support and services," on page 65.
Action
59