Kenmore 790.9010 Series Use & Care Manual page 20

Oven Cleaning
FEATURE OVERVIEW
* Self-Cleaning Cycle
O
0
®
0
@
91P OVEN
O PREHEAT
DOOR LOCKED
. ® .
To start the Self-Clean Cycle
aWe recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for average to heavy soils.
INSTRUCTIONS
To Set the Controls for a Self=Clean Cycle:
1. Be sure the clock shows the correct time of day, and the door is
closed.
2. Push c_. ,, " appears in the display.
3. Push the A until "3:00" appears in the display for a 3 hour cycle,
or push the v until "2:00" appears in the display for a 2 hour
cycle.
4. As soon as the A or V is released, the motor driven lock will
start closing, the "Locked" indicator light will flash and "CLN"
appears in the display; after approximately 10 seconds, "DR" and
"CLN" will show in the display and three beeps will sound when
the cleaning cycle starts. Do not open the door while the light is
flashing (it takes about 15 seconds for the lock to close). When
the light stops flashing the door is locked.
Stopping or Interrupting a Self=Cleaning Cycle
if it becomes necessary to stop or interrupt a self-cleaning cycle:
1. Push _.
2. Once the oven has cooled down and the "LOCKED" light has
gone out, the oven door can be opened.
PRESS
@
AorV
®
DISPLAY
IE/
IRgg
When the Self=Clean Cycle is Completed:
1. The time of day will appear in the display window and the
"LOCKED" light will continue to glow.
2. Once the oven has cooled down and the "LOCKED" light has
gone out, the oven door can be opened.
Do not force the oven door open. This can damage
the automatic door locking system. Use caution when opening the
door after the self-cleaning cycle is completed; the oven may still
be very hot.
2O